Press the ceiling with your palms to find a place where you don't float up.

Attach the joint to the upper pipe.

Attach the middle pipe to the lower pipe.

Attach the upper pipe to the middle pipe.

Place the ceiling plate over the joint and extend it up to the ceiling.

Screw the joint and lightly brace it against the ceiling.

Attach a level to the side of the upper pipe and check for horizontal alignment.

After confirming it is level, rotate the joint again (up to 2 full turns) and securely tighten the lock nut.

The handle is secured with bolts at four points. Please make sure to loosely tighten all four points first, then tighten them securely afterward.

The handle is attached to the upper pipe, and it's complete.