My name is Oguma from TEDDY WORKS Co., Ltd., and I always end up putting off updating my website.
As we announced on social media and in press releases, KENSUI kaku model2 is now on sale!
I will briefly explain the differences between model1 and model2.
■The length of the handle and handle support has been increased by 20 cm
The length has been changed so that even if you lean back while doing pull-ups, you will not come into contact with the frame or the optional KENSUI bench.
-Handle diameter changed to 3.4 mm.
In response to feedback that model 1 was too thin, we have made the diameter 0.5mm thicker.
- The left and right bending of the handle has been eliminated and it has been changed to a straight bar.
→It is now possible to hook the roll handle all the way to the end, allowing you to perform wide parallel pull-ups.
- A carabiner hook hole has been added to the center of the handle.
→Tubes and suspension trainers can now be easily attached.
-The handle attachment point has been changed to a lock pin.
→It is now easier to remove than model 1.
■Frame : Maximum ceiling height increased by 10cm (up to 275cm)
-Double nuts are used at the joints.
→The rotation of the frame has been reduced.
If you have any questions, please feel free to contact us.
TEDDY WORKS
Oguma
